Assembly of electronic circuits is a great way of electronic learning, and are selected depending on the project, a series of tools and components needed accordingly. However, there are some basic tools and electronic components that are needed in almost all electronic designs and are a "must have".
The first thing to note is how the card is used. The card is one that is mounted on the circuit and connected. There are three main types ofPCBs - the strip, strip the PCB and the PCB.
The experimental setup is used to make temporary circuits and requires no welding, while the other two types are both permanently and require the parts to be welded them.
When working on PCB boards or strips, is the first tool that requires a soldering iron. Together with a soldering iron, soldering stand, solder wick spool of welding and removal would also be necessary.
InIn addition to the above, have side cutters to cut the component cables and strippers to cut the cables you need. A small pair of needle nose pliers is required to bend the tubes to keep small parts in place during welding.
A screwdriver, electric drill and heat sink will also be very useful when working on electronics projects.
In addition to tools, a number of electronic components are required depending on the project. A good collection ofIt will begin with capacitors, resistors, variable resistors, diodes, transistors, wires, switches, and included a power source.
After these basics, to start experimenting with electronic circuits.
No comments:
Post a Comment